Specifications
Say the number.
Buyers choose on output, room volume, heat-up time and steel thickness. Everything we have is on this page, and everything that is still a target rather than a measurement says so.
The Versa ladder
6 models
| Line | Model | Model code | Output | Room volume | Stones | Flue |
|---|---|---|---|---|---|---|
| Sauna | Versa 13 | Pending | 15.4 kW | 6–13 m³ | 90–110 kg | Ø 115 mm |
| Sauna | Versa 13 LS | Pending | 15.4 kW | 6–13 m³ | 90–110 kg | Ø 115 mm |
| Sauna | Versa 16 | Pending | 17 kW | 8–16 m³ | 140 kg | Ø 115 mm |
| Sauna | Versa 16 LS | Pending | 17 kW | 8–16 m³ | 140 kg | Ø 115 mm |
| Sauna | Versa 20 | Pending | 20 kW | 12–20 m³ | 160 kg | Ø 115 mm |
| Sauna | Versa 20 LS | Pending | 20 kW | 12–20 m³ | 160 kg | Ø 115 mm |
About these figures
Every figure on this page is a design target, not a measurement. It is what the stove is being built to, not what we have put on a meter.
We publish a tested number once we have fired the stove and written it down. Until then the target is what we have, and we would rather tell you which one you are reading. Clearances to combustibles are not on this page at all — an installer quotes a job off them, and they belong to a tested appliance.
Reading a model code
The code is stamped on the etched plate and stencilled on the crate. It readsSH – line – output – finish.
- SH
- Stovehaus
- SN / JZ / FP
- Line — sauna, jacuzzi, fire pit
- 16
- Output in kW
- CS / BK
- Finish — corten steel, black
Example: SH-SN-16-CS would be a sauna heater, 17 kW, corten steel. No codes are assigned to the Versa line yet.
Units
Anything crossing the border is given metric first with imperial in parentheses, on every dimension. Sauna heaters are rated on room volume in m³, not floor area — a room with a high ceiling needs more stove than its footprint suggests.
Certification
Certification status not yet published. Ask us directly and we will tell you exactly where each line stands.
Need a figure that is not here?
Request a quote